Swiss machining metal fabrication shops in Los Angeles

Swiss-type lathes feed bar stock through a guide bushing so long, slender, small-diameter parts hold tight tolerances — medical pins, connector contacts, fasteners.

Swiss work is priced by cycle time on high quantities. Give bar diameter (usually under 1.25 in), length, tolerances and annual volume; ask about bar stock availability in your alloy.

The shops — 2

Each shop's verified swiss machining fact is quoted from its own website; open the shop for every other capability on record.

• A1J Technologies, LLC

  Newport Beach, CASwiss Screw Machining

  CNC lathes, Swiss machining centers, and combination mill-turn machines, source

• R J Enterprises

  Gardena, CASwiss Screw Machining

  Sixteen Swiss-type lathes — Citizen L12, L20 and L32, Citizen/Miyano BNX and BNA, Tsugami S205-II and B0325V-II — holding ±.0005 in on turned diameters with as-machined finishes that rarely need a secondary operation. source

Fewer than three verified shops here yet — this page grows as more shops in the area are verified.

Find similar

All metal fabrication shops in Los Angeles · Swiss machining metal fabrication shops in California · CNC turning in Los Angeles · Mill-turn in Los Angeles · CNC milling in Los Angeles